|PRODUCT NAME||Self adhesive bitumen backed roofing flashing band tape|
1)Top layer:Silver / Colored Alum foil , HDPE film , Cross-linked film
2)Mid layer:Modified bituminous layer
3)Botton layer:Release liner interleaving (removed prior to use)
|THICKNESS (mm)||1mm / 1.2mm / 1.3mm / 1.5mm / 1.8mm /2.0mm......|
|WIDTH (cm)||5cm / 7.5cm / 10cm / 15cm / 20cm / 30cm......200cm|
|LENGTH (m)||3m / 5m / 8m / 10m ......20m (Normal:10m per roll)|
Normal package: 2 pieces of blank round paper / shrinked plastic film per roll,carton and packing belt outside. with or without customers'logo.
*seal leaks in caravans,cars,trucks,metal water tanks or troughs
*seal window sills,sliding doors,air vents,around chimneys and corrugated roofing sheets
*can reduce energy costs by sealing construction gaps
*seals joints between carports or "lean to" and supporting walls
Attention / Storage /Application:
|STORAGE||Store in a cool,dry area away from direct sunlight.|
Do not expose to petrol, white spirit, paraffin and similar organic solvents which will dissolve the bitumen.
|APPLICATION||*Ensure that surface is free from dirt,dust,contamination|
*Remove any loose material using a scraper or wire brush
*Application: +5 to +45ºC
*Unwind and cut tape to required length
*peel back the release liner and apply to the surface firmly.
Ensure that no air is trapped.
*Using a small roller,ensure that all the edges and overlaps are forming proper seals and installed in a manner were they will be self draining.
*overlaps should be at least 25mm
|PRIMER||*Porous surfaces such as concrete or brick may be primed prior to application with a bitumen based primer.|
*Always ensure volatile content of primer has evaporated before applying the flashing tape.
*Do not trap solvents between the tape and the surface being protected.
|CHARACTERISTICS||1)Self adhesion without torch,no pollution|
2)Good rubber elasticity / elongation / self-healing
3)Stick permanently to clean surfaces
4)Can help prevent mould by sealing out moisture